Xenarc 700TSU, Руководство по установке

Страница: 16 / 23

This dialog shows to ask user if the RS-232 driver for touch screen to be installed.
User can check this check for RS-232 driver installation. After check or uncheck this
check box, press Next button to continue installation. Then, it shows new dialog as
below,
Also, eGalaxTouch software provides user with a fast 4 points calibration. If the
system needs 4 points calibration to make sure the touch accuracy every system
reboot, user can check this check box. The 4 points calibration window will be
popped up for calibration whenever system boot up if this check box was checked
during driver software installation.
Press Next button to continue installation. The setup program prompts a message
box to hint
|
Software Installation
16