SuperPro
®
6100 Programmer
www.xeltek.com
44 / 64
1296 Kifer Rd. Suite #605
Sunnyvale, CA 94086
Tel: +1 408-530-8080
Fax: +1 408530-0096
been inserted incorrectly, refer to the “Device Pin Insertion
Test”. After the chip is placed properly, the software automatically starts the
‘Auto’ operation.
The programmer waits for the taking-out of the chip. “Please, remove the device
from the socket” prompts the user to take out the chip because programming has
been finished. At this moment, check the programming result, check whether it
has succeeded or failed, according to the info in the ‘Operation Info’ window. To
end the production mode, please click ‘Cancel’ button on the right side of status
bar.
4.1.4.4 Log File
Save the information in the Operation Information window in a file. In the execution
process of the program, some content and data are written to the file when the
program exits.
1. No saving. If the file exists, it will be deleted.
2. Every time the program is started, the old records in the file will be deleted.
3. Every time the program is started, the new records will be added after the old
records.
4. The full path name of the log file. It can be edited.
4.1.5 Project
The project file is a file in which all the current working environment is saved. It
includes:
The current device's info, such as the manufacturer name, the device type, the
information about the pin, the size, the current buffer data and data file name.
Since the buffer data may have been revised, the buffer data may differ from the
data of the data file and the revised buffer data prevail.
All Operation Option settings.
The content of the ‘Auto’ mode
The project saves all the preparations before the programming. The user can restore
the saved working environment.
