SuperPro
®
6100 Programmer
www.xeltek.com
24 / 64
1296 Kifer Rd. Suite #605
Sunnyvale, CA 94086
Tel: +1 408-530-8080
Fax: +1 408530-0096
<2nd 2_byte of 4>:
load the last two bytes of every four bytes and
discard the other two bytes.
5. Start Address of the Data Buffer. The data are loaded into the buffer from this
buffer address.
6. File Offset Address. For files whose start addresses are non-0 start addresses (data
offset addresses), their start addresses may need to be input when the files need to be
loaded. Input the correct addresses in the edit boxes. The incorrect file offset address
causes the head part of the buffer to be filled with FF (or incorrect data). The
incorrect and large offset address causes the data to overflow or the system to fail. In
order to avoid any unwanted events, the software will automatically detect the
minimum offset address and display it in the information box.
7. Fill the data buffers with the specified data before the data are loaded.
8. Fill out the data input box.
9.If “File Offset Address” is not 0, load the file from non-0 start addresses (data
offset addresses).
4.1.1.2 Save
Save the data in the current buffer to disk.
1. Data Buffer Name.
2. File Name for saving the Data.
3. File Type.
4. Start Address of Data Buffer. The data in the buffer is saved from this address.
5. Data Size to Be Saved. Save the data of the corresponding amount (the unit is
byte).
4.1.1.3 Recent Projects
The full file names (including the full path) of the recent projects have been saved in
the sub-menu of the main menu, it is convenient for the user to re-open the projects.
