09
4.Throttle and Pitch Curves
The xelaris XT-6 transmitter offers the possibility to program two
different 5-point throttle and pitch curves.
Press the MENU key until you get to the main menu
CUV
.
Press the SUB key to get to the four submenus: Thr, Pit, T3d, P3d.
The menus Thr and Pit refer to the values when the 3D switch is in
the NORMAL position; T3d and P3d refer to the values when the
switch is in the 3D position. The illustration on the right shows the
standard values. Changing the values enhances or lowers the
curves at the corresponding points.
4.1 Thr / Normal Throttle Curve
1. Press the LEFT or RIGHT key until you get to the desired data
point.
2. Adjust the value with the Y/UP and N/DOWN keys.
3.
Save changes according to step 1.2!
4.2 Pit / Normal Pitch Curve
1. Press the LEFT or RIGHT key until you get to the desired data
point.
2. Adjust the value with the Y/UP and N/DOWN keys.
3.
Save changes according to step 1.2!
4.3 T3d / 3D Throttle Curve
1. Press the LEFT or RIGHT key until you get to the desired data
point.
2. Adjust the value with the Y/UP and N/DOWN keys.
3.
Save changes according to step 1.2!
4.4 P3d / 3D Pitch Curve
1. Press the LEFT or RIGHT key until you get to the desired data
point.
2. Adjust the value with the Y/UP and N/DOWN keys.
3.
Save changes according to step 1.2!
3.4 Gyr (Gyro / Landing Gear)
This function sets the values for channel 5. Channel 5
the gyro sensitivity in the helicopter mode and controls a
retractable landing gear in the airplane mode.
1. You can choose either GyrU or Gyrd with the LEFT and RIGHT
keys (GyrU refers to the value when the channel 5 switch is in
the U-position, Gyrd refers to the value when the channel 5
switch is in the D-position.
2. Adjust the value with the Y/UP and N/DOWN keys between
-100% and +100%.
controls
www.xelaris.ch
0
25
50
75
100
1
2
3
4
5
Throttle Curve
Normal Throttle Curve
3D Throttle Curve
0
25
50
75
100
1
2
3
4
5
Pitchkurve
Normal Pitch Curve
3D Pitch Curve
