manualshive.com logo in svg

Xelaris XT-6, Руководство пользователя

Поделиться
Скачать
Xelaris XT-6 Скачать руководство пользователя страница 11

11

Additional Information

6.4 Trm (Subtrim)

Press the SUB key to open the menu Subtrim. Choose the 

desired channel with the LEFT and RIGHT keys and adjust the 
value with the Y/UP and N/DOWN keys b100% and 

-100%. 

Save changes according to step 1.2!

6.5 Changing the Mode

The xelaris XT-6 transmitter allows you to change the mode 

instantly.

WARNING: Never change the mode when the model is 

switched on!

1.  Press the SUB key until Left (in mode 2) or Rit (in mode 1) are 

shown on the display. To change the mode press LEFT or 
RIGHT and confirm with the Y/UP key.

2.  The screws for changing the mode are on the back of the 

transmitter housing. Screws A and B control the spring effect, C 
and D control the steering drag. 

Mode 2: Loosen screws A and C, tighten screw B completely 

and tighten screw D as desired.

Mode 1: Loosen screws B and D, tighten screw A completely 

and tighten screw C as desired.

Undervoltage Alarm

As soon as the battery voltage drops below 8.5V, the red LED 
starts to blink.

WARNING: Replace the batteries immediately!

Adjusting the Stick Suspension

You can mechanically adjust the reset force of both 
sticks.Therefore, open the transmitter housing. Loosen the 
adjusting screws to soften the suspension. Tighten the 
adjusting screws to harden the suspension.

Adjusting the Stick Length

You can mechanically adjust the stick length. Loosen the upper 
part of the stick by turning both parts in the opposite direction. 
Adjust the desired length with the lower part of the stick and 
tighten the upper part again. 

C

A

B

D

Adjusting Screws

 www.xelaris.ch

Содержание XT-6





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды