Xeeder Zigbee, Руководство пользователя

Страница: 15 / 19

Each brand new lock should be initialized as the 3 steps(STEP3-5) after they had been installed on the door .
Since when the lock been initialized it has the ability identify the keycards issued by Hotel lock system which is registered by the
same Authorized card .
You dont needs do the above again in daily using unless the lock ready to moved to another hotel .
Different hotel should use different hotel code ( Authorized card saves hotel code info )
Time card should be issued in Hotel Lock System
It should be in fresh time which same as the current real time . You can not use a yesterday issued Time card or even many minutes agos
because the clock of lock should always run at same or near as the real time .
To reduce the error between clock of lock and the real , we suggest 1 fresh Time card do set 1 floor rooms only . After finish 1 floor you should
issue another fresh .
Or you can do adjust the Setting time at a time several minutes ahead of the real when you issue it in Hotel Lock System
.
Then you can do
floor by floor by changing a fresh Time card .
Setting card should be issued in Hotel Lock System
It should be 1 pc for 1 room because it saves 1 room ID only .
We suggest you issue all rooms at one time and mark on each card room ID .
STEP 4 .Activate clock
STEP 5.Set room ID
STEP 3.Set hotel code
Initialize rooms
STEP 1 .Make Setting Card
T
Maintain>Time Card
Place a blank card and
click Issue to complete
S
Maintain>Setting Card
Select one room ID.
Place a blank card and click Issue to complete
STEP 2 .Make Time Card
You should complete Setting cards for each room ID.
e.g. There are 30 rooms total. You must make 30pcs setting cards. Each room 1pc card.
PDA
B
Beep
, Beep
...
2.Move
away card blue light
flash with
2beep 1.Place an
Authorzied
card near the
sensor
window.
B
Beep
, Beep
...
2.Move
away card blue light
flash with
2beep 1.Place a time
card near the
sensor
window.
B
Beep
, Beep
...
2.Move
away card blue light
flash with
2beep 1.Place a
setting card
near the
sensor
window.
Lock Settings
14
T
S
T
T
S
S