39
Evolve User Manual V1.0 by XDynamics Limited
After a landing the drone, hold the throttle stick down and to the left to disarm the motors. The LED
indicators will change color followed by a long beep and propellers will stop spinning. Make sure the all
the LED indicators are solidly lit by the same color (either Green or Blue) with no blinking before moving
the sticks back to central position. If the LEDs are blinking the drone is still in arming mode, keep the
sticks in the same position until all the LEDs are solid (either Green or Blue).
Push the throttle stick down and to the left
and wait for the LED’s light change. During
disarming the LEDs color will fast blink
different colors followed by a long beep, the
motors will then engage and the propellers
will start spinning. Move the throttle stick to
the middle position and the drone is ready to
take off manually.
Disarming:
Disarming the Drone
Ensure the drone is fully disarmed (either solid Green or Blue LED) before returning the left
thumb stick is returned to the middle position.
