23
Auto DiSEqC
Press [Blue] key to run Auto DiSEqC
function, it can find the satellite connect
to which port automatically.
Blind Scan
Press [White] key can directly into blind
scan mode to scan the current satellite.
10.2 Auto installation
“Auto Installation” is a very new and
convenient function. It will automatically
detect all dishes connecting to this
machine and scan the available services
belonging to the satellite matched
according to satellites and transponders
data in current database. You don’t have
to input any parameter of your antenna
When you complete your modification,
Press [Red] key, it will show up a dialog to
ask you scan mode, program type, scan
type and NIT Search on/off. After you set
up, press [OK] key to start scanning.
In the “TP Scan” item, press [Exit] key to
exit the scanning and save the current
parameters.
Single Scan
Press [Red] key to show up a dialog to
ask scan mode (if you want to scan all or
only scan free channels), program type
(means you want to scan all channels or
only scan TV/Radio channels), scan type
(means preset scan, that is searching the
existed TP. Automatic Scan means blind
scan. It is no need existed TP info) and
NIT Search on/off. After you set up, press
[OK] key to start scanning.
Press [White] key into the blind scanning
immediately.
TP Scan
Press [Green] key to scan current TP’s
programs.
When you press [Green] key, it will
display “New TP” in “TP Index” item;
You should set the parameters of “TP
Frequency” and “Symbol Rate” for this
new transponder. The parameters of
“TP Frequency” and “Symbol Rate”
can set by number keys. The available
range are “3000~13450 MHz” and
“1000~45000Ks/s”.
When you press [Yellow] key, there will
show up a warning message for reminding
whether you will delete the current
transponder or not. If you select “Yes”,
the current transponder will be deleted,
and the total account of transponder will
reduce 1 correspondingly.
When you press [Blue] key, there
will show up a warning message for
reminding whether you will delete all
transponders or not. If you select “OK”, all
transponders will be deleted.
For the existed transponder, you also
can use number keys to modify the
parameters of “TP Frequency” and
“Symbol Rate”.
