manualshive.com logo in svg

XCMG XDN450, Руководство по эксплуатации

Поделиться
Скачать
XCMG XDN450 Скачать руководство пользователя страница 38

!

coordinates by means of software calculations. The calculated coordinates are communicated 
with the PLC via RS232, and the PLC obtains the coordinate values for transmission from the 
man-machine interface. 

4) 7" display (1): The display of the industrial computer presents the image in the target 

box, the laser spot and coordinates. 

5) 7" display (2): External camera can be monitored to monitor the scene. 

3.1.1.3

 Articulated shield 

It is equipped with cutter motor, internal hydraulic pump station, internal solenoid valve 

group, laser target box, correction cylinder, internal bypass valve, internal and external bypass 
valve, pressure sensor, displacement sensor and proximity switch. 

1) Cutter-plate motor: The power line will output three-phase 220V voltage from the 

electric control cabinet, which can be reversed. 

2) Internal hydraulic pump station: The power supply is controlled by a one-way 220V 

output from the electric control cabinet, and the pressure source of the hydraulic system is 
supplied to the machine. 

3) In-machine solenoid valve group: Controls the movement of the hydraulic components 

inside the machine. The DC24V electric control solenoid valve is supplied by the target control 
box. 

4) Laser target box: The built-in camera captures the laser spot position, the DI module 

reads the proximity switch signal, the DO module controls the solenoid valve, and the AD 
module reads the pressure displacement signal. 

5) Correction cylinder: control the nose jacking direction. 

6) Internal bypass valve: Control mud open or closed. 

7) The bypass valve inside and outside the pipe: control the position of the mud to be sent 

out. The inside of the pipe is to send mud water to the inside of the crusher, and the outside of 
the pipe is to send the muddy water to the outside of the fuselage. 

8) Pressure sensor: Detect hydraulic oil pressure and hydraulic pressure. 

9) Displacement sensor: Detect the displacement of the correction cylinder and convert the 

correction angle at the same time. 

10) Proximity switch: Detects the opening and closing of the bypass valve and the bypass 

valve inside and outside the tube. 

3.1.1.4 Main pump station 

Provides  the  main  oil  pressure  source  of  the  top  cylinder,  and  provides  the  pit  bypass  valve 
control  oil  pressure  source.  Built-in  pressure  sensor  detects  hydraulic  pressure,  built-in  gear 

17

Содержание XDN450































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды