XCLEA H30 Plus, Руководство по эксплуатации, Страница: 10 / 182

8
Step 3: Install the dust box + water tank (2 in 1)
Push the dust box + water tank (2 in 1) horizontally in the direction of the groove on the main unit
until you hear a "click" sound. Step 4: Install the mopping module
Push the mopping module buckle in parallel along the dust box + water tank (2 in 1) until you hear a
"click" sound.
Caution
1. Do not use the mopping function on the carpet.
2. When charging or when the robot is not in use, remove the mopping module, pour out the excess water in the water tank and clean the mop to avoid mold or odor.
3. It is recommended to clean the mop each time to maintain water speed and cleaning effect. Replace with a new mop if necessary.
4. When charging the main unit on wooden floors, remove the mopping module in a timely manner to prevent water seeping from the mop and damaging the floor.
Downloading app
* Either of below apps can be installed and used
Installing Xclea app
This product can be controlled using the Xclea app, which supports both Android and iOS
systems.
1. Search for “Xclea” in the app store or scan the QR code below to download and install the app.
2. Sign in to the app. Long press and buttons on the robot cleaner at the same time for
longer than 3 seconds to reset it. Click “+” at the upper right on the app’s homepage to add
device. Select the robot cleaner from the device list and connect it to WiFi according to the
prompts.
Reset WiFi Add device Configure network
Long press
and to reset
3. If you have any question, please contact our service personnel or visit our official website.
* This product only supports 2.4G WiFi
Smart devices can be interconnected via HUAWEI HiLink app.
Devices which support HUAWEI HiLink app can be managed and controlled via Huawei SmartHome
app.
Installing Huawei SmartHome app
Scan the QR code, or search for “Huawei SmartHome” in the app store to download and install the app.
If your phone has Huawei SmartHome app installed, ensure that it is the latest version.
1. Connect your phone to the home WiFi.
2. Open the Huawei SmartHome app. At first use, register an account and log in to the app as per the
instructions.
3. Long press and buttons on the robot cleaner at the same time for longer than 3 seconds to
reset it. Click “+” at the upper right on the app’s homepage to add device.
If no devices are found, click “Add manually” to manually add a device according to the prompts.
4. Click the device you want to add from the device list found. As per the prompts, enter the password
of the home WiFi to connect the device to the Home WiFi.
Only devices which support HUAWEI HiLink protocol (usually on the device’s packaging or user
manual is marked with text such as “works with HUAWEI HiLink”) can be added via the app.
HiLink
Reset WiFi Configure network Add device
Long press
and to reset
5. Name the device and arrange it in the virtual room created on the app. Once completed, the device
is successfully added.
Once added, the smart device will be shown under “Home” on the app’s homepage. Click the device
on the app’s homepage to enter the device control interface to control the device.
EN