19
30801000/2000/3000 - High-Speed Racebuggy 2WD
EN
Getting started
Pairing method
What is pairing? It means that the using frequency can be determined
automatically when player connects vehicle to the transmitter.
• Pick up the vehicle as picture to make the wheels rotate freely before
turning on the vehicle’s power.
• Turn on the power switch of vehicle and the red LED light flashes in the
following order:
• Turn on the power switch of transmitter. The red LED light will flash,
• Keep the transmitter next to the car (about 50 cm)
. The red LED light flashes in the following order:
At this moment, the transmitter pairs automatically and the light keeps on.
When the lamps (both vehicle and transmitter) completely light in 2 seconds, it means
that the frequency pairing finishes. If not, please repeat this step.
Some cars drive at the same time: If other players used this product, the frequen-
cies are possibly same. At this moment, you can keep other controllers next to yours
(within 5m) and pair them to avoid the same frequencies.
The installation of the Rollcage
Rollcage´s installation can make the tilted vehicle restore easily. Certainly the vehicle can move without a
Rollcage.
Rollcage´s making
Please pay attention to the direction
flash 3 times extinguish flash 3 times extinguish
Furl and fix it with the double-sided adhesive tape.
Vehicle surface
Power
switch
Red LED
light
Vehicle bottom
Flash 3 times on Flash 3 times on
Double-sided
adhesive tape
Back
Front
Double-sided
adhesive tape
Please wipe the surface
before sticking on the
adhesive tape.
30801000-2000-3000-High-Speed Racebuggy 2WD-Anleitung.indd 19
06.08.2013 11:03:35