18
30801000/2000/3000 - High-Speed Racebuggy 2WD
EN
RC-System
Battery installation
• Remove the battery cover of the transmitterwith a crisscross screwdriver.
• Properly install 4 x AA batteries.
• Fix the battery cover of the transmitter.
Charge method
• Please take out the vehicle shell when it needs to
charge.
• Push the power switch (at the bottom of the vehicle)
to “OFF”.
• Push the power switch of remote controller to “ON”. (the red LED light flashes).
• Insert the charging plug of the transmitter into the vehicle body.
• When it charges, the red LED light changes to green (normally on), once charge finishes, the light changes
to flashing red.
• The charge time depends on the battery capacity. The common charge
time is about 60 minutes.
• When charge finishes, push the power switch of transmitter to “OFF” and
remove the charging plug from the body.
Transmitter
AA Alkaline
batteries
Power switch
Backside
Make one side
backwards
Charging plug
Power
switch
30801000-2000-3000-High-Speed Racebuggy 2WD-Anleitung.indd 18
06.08.2013 11:03:35
