Copyright | NZS Installation and Operation Manual
17
4.2 Unpacking
CAUTION
Check whether the outer package is complete, there is no breakage, crack, scratch,
etc.
Considering that the center of gravity of the products is high and to one side, when
forklift trucks are handling the products, the fork arms should be spread out as far
as possible, the fork arms should be inserted into the pallet as deep as possible in
the front and rear directions, and the start/stop and transfer should be carried out
slowly.
Do not push the outer package or equipment by external force to prevent the risk of
tipping.
It is necessary to pay attention to vertical transportation. If the indicator turns red, it
can be assumed that there might be strong shocks and tilts during transportation.
Please check the package and products carefully.
·
Forklift specifications: ESS weighs 2.6T and requires a motorized forklift with a rated
lifting weight of ≥5T.
·
Untie the tie-down straps on the truck.
·
After confirming the safety within the forklift operation radius, start the forklift operation
and put the ESS, Charger, Metal Base on a level horizontal ground.
·
Remove the outer wooden box with a crowbar (charger as an example)
Unloading and unpacking steps are as follows:
Содержание NZS Series
Страница 2: ......
Страница 12: ...2380 2300 1548 1395 1242 1096 5 1017 75 991 5 1123 750 8 Copyright NZS Installation and Operation Manual...
Страница 61: ......