9
WTP-20
1.
Remove the backing from the adhesive strip on the metal bracket.
2.
Mount the metal bracket halfway down the left side of your monitor’s
bezel. The bracket should be perpendicular to the monitor. Press firmly so
the bracket stays in place.
3.
Mount the IR receiver to the metal bracket or strip. The receded
magnetic area of the WTP-20 receiver should fit perfectly over the
folded outer edge of the bracket and lock into place.
Make sure the IR receiver is facing the proper direction. The USB
cable should be pointing down, and the IR sensor should be facing
the screen perpendicularly.
4.
Plug the IR receiver’s USB plug into a free USB port on your computer.
WTP Manual.indd 9
12/20/13 9:55 AM
