23
VIPER MIG 165
OPERATING MANUAL
XCEL-GAS
XCEL-GAS
X
CEL
-
G
AS
21.
Adjust gas flow to 8-12L/min.
22.
For
Synergic MIG
operation, select your wire size and
type. Adjust the amperage dial up or down according
to your material thickness.
For
Standard MIG
operation adjust the voltage and
wire feed speed according to your material thickness.
23.
Connect earth clamp to your workpiece.
24.
Line up the torch with your workpiece, then simply pull
the trigger to initiate the weld. For gas-shielded MIG,
the push method is recommended for optimum weld
quality. Release trigger to end the weld.
MIG: Machine Setup (Gas-Shielded)
