X16plus Administration Manual
Page 23 of 54
Rev. 1.1.4
Name
Description
Outbound Proxy
Port
Outbound Proxy Port.
Register Interval
The timing value of register cycle.
NAT Refresh
Interval
Used for some complicated ITSP network topology.
NAT Refresh
Message
Message type: SIP PING
/
OPTIONS
/
NOTIFY
/
UDP
.
Bind Mode Server
Status Check
The device will send a NAT Refresh message to ITSP Server
periodically to sync session status of each other.
Server does not
support send-only
This field is for ITSP Server compatibility. Please enable this
item when ITSP Server does not support Send-Only SIP
specification.
SIP Trunk # Key as
Dialing Ending Key
# is a dial out digit or Ending Key.
Reinvite Resend
flag
SIP trunk will re-send INVITE message when the call session
is established.
IPT NAT Traversal
When ITSP SIP Server does not support NAT Traversal, this
field should be enabled and let system modify SIP signal to do
NAT Traversal on the device.
Enable External
Route IP
This field is used for resolving ITSP SIP Server compatibility
issues.
External Route IP
External route IP address.
REFER mode for
IPT to IPT XFR
System will use REFER to implement IP trunk to IP trunk
transfer when this field is enabled.
Short Number
Display
System will use XD10/IP Phone number for outbound trunk
calling number if it is enabled.
Trunk To Trunk
Media Relay
Controls whether the media of the IP trunk to IP trunk call is
relayed by the device.
Trunk CID Through
to trunk
The outgoing trunk will send the incoming trunk CID when
trunk to trunk status.
CID Delete Digit
Lengths
CID Delete Digit Lengths.
CID Insert digit
CID Insert digit.
Содержание X16 plus
Страница 1: ...Page 1 of 54 Rev 1 1 4 X16plus X16plus HYBRID Administration Manual ...
Страница 28: ...X16plus Administration Manual Page 28 of 54 Rev 1 1 4 PAGE INTENTIONALLY LEFT BLANK ...
Страница 38: ...X16plus Administration Manual Page 38 of 54 Rev 1 1 4 image 3 1 WAN Configuration ...
Страница 54: ...X16plus Administration Manual Page 54 of 54 Rev 1 1 4 End of File ...