Xantrex XW4024-120/240-60, XW4548-120/240-60, XW6048-120/240-60, Руководство по установке

Страница: 84 / 146

XW Solar Charge Controller Installation
4–4 975-0239-01-01
This manual for use by qualified personnel only
Removing the Wiring Compartment Cover
Before mounting, you must remove the wiring compartment cover to access the mounting
holes and the wiring terminals. The wiring compartment cover is secured with two
Phillips #8-32 × 2 ½-inch (63.5 mm) screws on the front cover of the unit. See Figure 4-2.
Removing Knockouts
Six dual and two single knockouts are provided for routing battery, PV array, BTS, and
network cables into the XW SCC. Bushings or conduits must be used to protect the wiring
from damage from rough edges around the knockout holes.
When removing knockouts, ensure that no metal shavings or fragments fall into the wiring
compartment.
Figure 4-1 Minimum Clearance Requirements
6 inches (150 mm) on top and side(s)
Figure 4-2 Removing the Wiring Compartment Cover
Remove screws to access
the field-wiring terminals.
xantrex
Important:
Do not drill, cut, or punch holes in the XW SCC. Use only the knockouts provided
for conduit entry.