Xantrex XPower Powerpack 400, Руководство пользователя

Страница: 30 / 76

Operation
3-4 975-0057-01-01
Using the light
The XPower Powerpack has a built in incandescent light
which will operate for about 30 hours before the unit needs to
be recharged. The ON/OFF switch is located beneath the
light. The light can be adjusted up and down by pushing
against the top or bottom of the rim around the lens.
Operating AC Appliances
Understanding AC Appliances
AC appliances are rated by how much electrical power (in
watts) they consume. XPower Powerpack can power most
appliances within its continuous power rating (320 W, 2.7 A).
Important:
The 35 hour charging time for the XPower
Powerpack assumes that there is 120 V at the AC wall
outlet. If the voltage is less than 120 V AC, it may take more
than 35 hours to fully recharge the
XPower Powerpack . If,
after 35 hours of charging, the green Charging Status light
is still flashing, continue to charge the unit for another 15
hours.
Important:
If you keep the XPower Powerpack in storage,
the battery will discharge over time. Remember to recharge
the battery every three months to keep the
XPower
Powerpack operational.
Note
:
Once fully charged, the charging current
automatically reduces to a maintenance charge mode, and
the
XPower Powerpack may be left permanently connected
to the AC Charger.
All manuals and user guides at all-guides.com