Xantrex XPower Powerpack 400 Скачать руководство пользователя

Страница: 11 / 76

Important Safety Instructions

975-0057-01-01

Precautions for Using Rechargeable
Appliances

Most rechargeable battery-operated equipment uses a

separate charger or transformer that is plugged into an AC

receptacle and produces a low voltage charging output.
Some chargers for rechargeable batteries can be damaged if

connected to the

XPower Powerpack 400 and XPower

Powerpack 400 Plus

Do not use the following with the

XPower Powerpack 400

and XPower Powerpack 400 Plus

•

Small battery-operated appliances like flashlights, razors,
and night lights that can be plugged directly into an AC
receptacle to recharge.

•

Some chargers for battery packs used in hand power
tools. These affected chargers display a warning label
stating that dangerous voltages are present at the battery
terminals.

CAUTION

The output of the inverter is non-sinusoidal.

Note

If you are unsure about using your rechargeable

appliance with the

XPower Powerpack 400 and XPower

Powerpack 400 Plus

, contact the equipment manufacturer to

determine the rechargeable appliance’s compatibility with
the modified sinewave (non-sinusoidal) AC waveform.

All manuals and user guides at all-guides.com

all-guides.com

Содержание XPower Powerpack 400













































































Результаты поиска

Содержание XPower Powerpack 400

Отзывы:

Похожие инструкции для XPower Powerpack 400

Бренды по названию

Популярные бренды

Xantrex XPower Powerpack 400, Руководство пользователя

Результаты поиска

Содержание XPower Powerpack 400

Отзывы:

Похожие инструкции для XPower Powerpack 400

Бренды по названию

Популярные бренды