background image

45

Warranty and Return

Warranty

What does this warranty cover?

This Limited Warranty is provided by Xantrex 

Technology Inc. ("Xantrex") and covers defects in workmanship and materials in your 
XPower Powerpack 300. This warranty period lasts for 6 months from the date of 
purchase at the point of sale to you, the original end user customer. You require proof of 
purchase to make warranty claims.

What will Xantrex do? 

Xantrex will, at its option, repair or replace the defective 

product free of charge, provided that you notify Xantrex of the product defect within the 
Warranty Period, and provided that Xantrex through inspection establishes the existence 
of such a defect and that it is covered by this Limited Warranty. 
Xantrex will, at its option, use new and/or reconditioned parts in performing warranty 
repair and building replacement products. Xantrex reserves the right to use parts or 
products of original or improved design in the repair or replacement. If Xantrex repairs or 
replaces a product, its warranty continues for the remaining portion of the original 
Warranty Period or 90 days from the date of the return shipment to the customer, 
whichever is greater. All replaced products and all parts removed from repaired products 
become the property of Xantrex.
Xantrex covers both parts and labor necessary to repair the product, and return shipment to 
the customer via a Xantrex-selected non-expedited surface freight within the contiguous 
United States and Canada. Alaska and Hawaii are excluded. Contact Xantrex Customer 
Service for details on freight policy for return shipments outside of the contiguous United 
States and Canada.

How do you get service?

If your product requires troubleshooting or warranty 

service, contact your dealer.

If you are unable to contact your dealer, or the dealer is unable to provide service, contact 
Xantrex directly at:

Direct returns may be performed according to the Xantrex Return Material Authorization 
Policy described in your product manual. For some products, Xantrex maintains a network 
of regional Authorized Service Centers. Call Xantrex or check our website to see if your 
product can be repaired at one of these facilities.

What proof of purchase is required?

In any warranty claim, dated proof of purchase 

must accompany the product and the product must not have been disassembled or 
modified without prior written authorization by Xantrex. 
Proof of purchase may be in any one of the following forms:

The dated purchase receipt from the original purchase of the product at point of sale to 
the end user, or

The dated dealer invoice or purchase receipt showing original equipment 
manufacturer (OEM) status, or

The dated invoice or purchase receipt showing the product exchanged under warranty

Phone:

1 360-925-5059

Fax:

1 360-925-5143

Website:

www.xantrex.com/support

XPower_PP_300_PlusEP.book  Page 45  Friday, May 19, 2006  11:29 AM

Содержание XPower Powerpack 300





























































Отзывы: