40
An LED in the
flashlight is
not lit.
Flashlight is reaching the
end of internal battery
power.
Plug the XPower Powerpack into
an AC or DC power source and
place the flashlight back in the
flashlight compartment for
recharging.
Flashlight run
time less than
expected.
Flashlight was recharged
from internal battery when
XPower Powerpack was
not connected to a power
source.
For longest run time, ensure the
XPower Powerpack is connected
to the AC charger before
recharging the flashlight.
XPower
Powerpack
makes a
“chattering
sound when
flashlight is
inserted into
compartment.
Metal contacts on the
flashlight or in the
flashlight compartment
are obstructed with dirt,
corrosion or debris.
Unplug the XPower Powerpack
from all AC or DC power
sources and clean the contacts
using an alcohol swab.
Table 5-1
Troubleshooting reference
Problem
Possible Cause
Solution
XPower_PP_300_PlusEP.book Page 40 Friday, May 19, 2006 11:29 AM
