![background image](http://html1.mh-extra.com/html/xantrex/xpower-200/xpower-200_owners-manual_3186641051.webp)
Recharging the XPower Powerpack Battery
975-0057-01-01
4-5
To recharge the
XPower Powerpack
while you drive using
the DC Charging Cable:
1. While the vehicle engine is running, plug one end of the
DC Charging Cable into the DC Power Socket of the
XPower Powerpack
.
2. Plug the opposite end of the DC Charging Cable into the
vehicle’s lighter socket or 12 V accessory outlet.
3. Once the
XPower Powerpack
is fully charged or if your
vehicle’s engine is not running, disconnect the DC
Charging Cable from both sockets.
Most of the
XPower Powerpack
’s capacity will be
restored in four hours while the vehicle engine is
running.
Note
:
The green
Charging Status
light will not illuminate
when the
XPower Powerpack
is recharged through the DC
Charging Cable.
Note
:
Battery Charge (%)
indicator is only accurate when
the
XPower Powerpack
has been disconnected from all
appliances and all charging sources for fifteen minutes.
Important:
Do not leave the
XPower Powerpack
permanently connected to the vehicle’s lighter socket or
12 V accessory outlet.
Содержание XPower 200
