Xantrex TR1512-120-60, Руководство по установке

Страница: 52 / 70

I n s ta ll at i on
2 – 22 975 - 0367 - 01 - 01
This manual for use by qualified installers only
A C W i r i n g - Off - G r i d A pp li c a t i o n s
The following diagram illustrates the AC wiring for basic configurations . Consult
your system design for other possible configurations.
Follow the example below to complete the wiring for an off-grid application using
a generator. If you have a generator with three conductor outputs (120/240 V or
240 V input) you will need to use the auto-transformer (shown as optional in the
diagram) to combine the L1 and L2 lines to a single line. If you have a generator
with two conductor outputs (one 120 V single phase input) you do not need to
make use of the auto-transformer and your single line (L1) can be routed directly.
I m po r t a n t :
For system configurations without generator or utility AC input, the
neutral-ground bond should be placed in the inverter output load panel.
http://www.wholesalesolar.com/inverters.html
http://www.wholesalesolar.com/inverters.html