Xantrex PV100S-208 Скачать руководство пользователя страница 66

Страница: 66 / 124

Operation

2–26

152379 Rev C

Installing the Graphic User Interface (GUI) Software

The following section outlines the minimum system requirements for using the
GUI software and instructions for installing, configuring, and using the software.
Close all programs running on the computer before proceeding with the
installation.

Minimum System Requirements

The following lists the minimum requirements for using the Xantrex Solar
Graphic User Interface (GUI) Software.
•

Personal Computer with a 486DX/66 MHz or higher processor; Pentium™ or
higher processor recommended.

•

Microsoft Windows™ operating system (Win98 or later).

•

50 MB of free hard disk space.

•

64 MB of RAM (128 MB recommended)

•

56K modem (minimum)

•

If using a LAN to access the inverters, a LAN card will be required in the PC.

Starting the Software Setup Program

Select one of the following methods to install the software:
•

Use Autorun (must be enabled on your CDROM drive).

•

Manual Start (assumes that Autorun is not enabled on your CDROM drive).

•

Use a Command prompt to initiate the installation program.

Starting the Setup Program Using Autorun

To install the software with Autorun enabled on your CDROM drive:

1. Insert the CD into your computer’s CDROM drive. If autorun has not been

disabled for the CDROM in your computer, the Model Specific Software
Installation window shown in Figure 2-11 will appear.

Starting Setup Manually

To start the program from the CD if Autorun is disabled on your computer:

1. Insert the

XANTREX SOLAR INVERTER GUI – INSTALLATION

into your CDROM drive.

2. Open Windows Explorer (or Click My Computer) and navigate to the

CDROM drive to view the contents of the disk.

3. Double-click on the file

GUI_Menu.exe

icon. The splash

screen shown in

Figure 2-11 will appear.

4. Proceed to the Model Specific Software Installation section on page 2–28 to

continue with the installation.

Important:

Software levels shown in the following illustrations may not represent the

most current version.

Содержание PV100S-208





























































































































Результаты поиска

Содержание PV100S-208

Отзывы:

Xantrex PV100S-208, Руководство по эксплуатации и обслуживанию, Страница: 66 / 124

Результаты поиска

Содержание PV100S-208

Отзывы: