![background image](http://html.mh-extra.com/html/xantrex/link-1000/link-1000_owners-manual_881353029.webp)
About Link 1000 Settings
21
Locking Your Setup Values
After you have set up the Link 1000, you can lock the settings
to prevent anyone from inadvertently changing them.
To lock the setup:
1. Hold down
SET
until
SEL
appears.
2. Press
SEL
until the
LOCK
LED comes on.
3. Press
SET
. The word
ON
or
OFF
appears
4. If
OFF
appears, press
SET
to turn the lock On.
Resetting Values
You can reset Ah to zero, or you can reset all values to their
factory defaults:
•
Resetting Ah to zero does not remove historical battery
data.
•
Resetting all values to factory defaults (Reset All)
removes historical battery data. You usually use Reset
All when you change a battery or a battery bank.
To reset values:
1. Hold down
SET
until
SEL
appears in the display.
2. Press
SET
five times until the
RESET
LED comes on and
AH
appears.
3. At this point you can reset Ah only, or you can Reset All:
• To reset Ah only, press
SET
until
ALL
appears, and then
release
SET
.
• To restore all factory settings, press
SET
until
ALL
appears, and then continue to hold
SET
for another five
seconds until
00.0
appears quickly and disappears.