©2001 Xantrex Technology Inc.
1
The GSM (Generator Start Module) is an accessory for selected Trace
inverter/charger models allowing automatic generator control and inverter error
indication when using the optional SWRC remote control. The unit contains
three relays providing normally open (N.O.), normally closed (N.C.) and
common (COM) contacts. Relays RY7 and RY8 are used for generator
control. Relay RY11 is used to indicate an error condition (via an external
indicator) whenever the inverters output is shutdown. This could be a bell,
buzzer, light, etc.
The unit interfaces the inverter (via a phone type cable) to an auto-start/
stop generator. Commands from the inverter control the generator when
defined parameters (programmed via the SWRC or SWCA for PS Series
models) are met. Refer to the inverter operators manual for setting the
various parameters for generator operation.
Front panel LEDs provide a visual display of relay activity whenever a
relay contact receives an engage command from the inverter. A highly visible
blue LED indicates the inverter is operational.
Unpacking and Inspection
Carefully inspect the contents of the shipping carton for damages. Report
any damages to the carrier immediately.
The following items are packed with the GSM:
Generator Start Module unit (GSM)
25-foot cable
Operators manual
Generator Danger Label
Report any missing items to Xantrex Technology Inc., immediately.
Figure 1
Generator Start Module (GSM)
1.0 INTRODUCTION
Содержание GSM - REV A
Страница 2: ......
Страница 27: ... 2001 Xantrex Technology Inc 21 ...