Materials List
975-1044-01-01
7
Introduction
The Xantrex Lithium-ion Batteries are lithium iron phosphate
(LiFePO
4
) chemistry batteries used in conjunction with the
internal Battery Management System (BMS) unit which protects
the batteries and monitors state-of-charge (SOC), voltage,
current, and temperature.
Figure 1 Typical System
Lithium-ion
Battery Pack
BMS
POWER SYSTEM
This guide provides instructions on how to safely install,
operate, and maintain your Xantrex battery system.
Installation Tools and Materials
Materials List
The Xantrex Battery base package includes the following items.
A
B
C
Figure 2 Materials List
A
Xantrex Battery
B
Quickstart guide
C
Rebling connector
NOTE
: If any of the items are missing, contact Xantrex or any
authorized Xantrex dealer for replacement.
IMPORTANT
: Keep the carton and packing material in case
you need to return the lithium-ion battery for servicing. The
battery requires special packaging and handling due to the
nature of the product.
Before You Begin
Before beginning your installation:
n
Read this entire Installation guide so you can plan the
installation from beginning to end.
n
Assemble all the tools and materials you require for the
installation.
n
Review the
Safety Information on page 4.
n
Be aware of all safety and electrical codes which must be
met.
WARNING
ELECTRICAL SHOCK AND FIRE HAZARD
n
All wiring should be done by qualified personnel to ensure
compliance with all applicable installation codes and
regulations.
n
Disable and secure all DC disconnect devices and
automatic generator starting devices.
n
Do not mount in a zero-clearance compartment.
Failure to follow these instructions can result in death, serious
injury, or equipment damage
