Installation Tools and Materials
8
Xantrex Lithium-ion Battery Owner's Guide
Installation Tools and Materials
You will need the following to install the Xantrex Battery:
n
Torque wrench
n
Multimeter
n
PPE
n
Wire stripper
n
Crimping tool
IMPORTANT
: A torque wrench is required for correct
installation of the batteries. A proper torque of 60±3 in-lb (or
6.7±0.35 N-m) is required for correct installation. If too little
torque is applied to the electrical connection hardware, it could
come loose during transportation or operation of the batteries. If
too much torque is applied the hardware could damage the
Rebling connector.
Installation Codes
Governing installation codes vary depending on the specific
location and application of the installation. Some examples
include the following:
n
The U.S. National Electrical Code (NEC)
n
The Canadian Electrical Code (CEC)
n
The U.S. Code of Federal Regulations (CFRs)
n
Canadian Standards Association/CSA Group (CSA) and
the RV Industry Association (RVIA) standards and codes
for installations in RVs
n
The American Boat and Yacht Council (ABYC) standards
and US Coast Guard Regulations (33CFR183, Sub Part I)
for Marine installations in the U.S.
It is the installer’s responsibility to ensure that all applicable
installation requirements are met.
