Xantrex 817-1000, Руководство пользователя

Страница: 60 / 82

46 Freedom X Owner’s Guide
Adjusting Feature Settings in Configuration Mode
Settings
Setting Name
Setting
Number Default
Value Range of
Values
Description
Inverter Ignition Control
   ,  , 
See “Description of Ignition Control Features” on page 31.
LBCO Voltage   .   .  to  .  The voltage setting value can be adjusted by 0.1 increments. The low
battery warning is triggered at LBCO v 0.5 volts. The low battery
warning goes away at LBCO v 1.0 volts.
LBCO Shutdown Delay
Timer    to  When the range is from 1 to 20, the timer setting value can be adjusted by
1-second increments. When the range is from 20 to 300, the timer setting
value can be adjusted by 10-second increments.
LBCO Recovery Voltage   .   .  to  .0 The range is from LBCO v 0.5 to 16, adjusted by 0.1 increments.
Selecting a higher value than the battery’s actual fully-charged voltage
level will not activate the auto-recovery feature. You may manually reset
the inverter when the low battery cut off event occurs.
Power Save Time    ,  to  The range is from 1 to 25, adjusted by 1-hour increments. The next setting
after 25 is OFF.
Power Save (Load Sensing)
Mode    (enable) ,
 (disable)
When enabled, the inverter’s “no load” loss can be reduced further when
total load is less than 25 watts.
Output Frequency    ,  After changing the output frequency setting, turn the unit off and then on
again, in order for the change to take effect.
Output Voltage    ,  , 
Freedom X Series INV Owners Guide.book Page 46 Tuesday, June 27, 2017 4:10 PM