Xantrex 817-1000, Руководство пользователя

Страница: 16 / 82

2 Freedom X Owner’s Guide
Introduction
Key Features
Power for Most Appliances The Freedom X inverter provides up
to 1000 watts (Freedom X 1000) or 2000 watts (Freedom X 2000)
of continuous utility grade, sine wave power derived from a battery
bank. It is designed to handle loads such as microwave ovens, TVs,
DVD/Blu-ray players, and power tools. In addition, the Freedom
X’s high-surge capability lets you handle many hard-to-start loads,
including full size residential refrigerators.
The built-in transfer switch automatically transfers between inverter
power and shore power from recreational facilities such as boat
docks or campsites to ensure power is always available.
Back-up Capability If incoming shore power is interrupted by
external events like brownouts, the Freedom X automatically
becomes an independent power source
a
that supplies utility grade
AC power to your loads.
Comprehensive Protection The Freedom X’s built-in protection
features safeguard your batteries (from unnecessary drain) such as
the low battery voltage alarm and shutdown and protect equipment
such as a configurable AC transfer speed.
• Selectable Low Battery Shutdown : The low battery
shutdown for the inverter can be manually selected by the
user from 10.0 to 12.8 VDC.
• Low Voltage Shutdown Delay Timer : Configurable from
1 to 300 seconds to reduce an unnecessary shutdown of
inverter operation such as during cranking or other brief
but heavy discharge of battery.
• Inverter Power Save : The Freedom X can be
programmed to automatically turn off after 1 to 25 hours of
continued operation of loads that are under 50 watts. It is
designed, with LBCO (low battery cut off), to prevent the
battery from deep discharge.
Configurable AC Transfer Speed The Freedom X allows two
speed settings for the AC transfer from Grid Mode to Battery Mode
and vice versa which avoids nuisance resetting of appliances. The
normal transfer rate is for common appliances and the faster transfer
rate is designed for more sensitive digital equipment like a desktop
computer.
Overload Alarm and Shutdown During Battery Mode (also
called Inverter Mode), the Freedom X automatically alerts you if the
loads that are connected and drawing power from the unit are close
to approaching the maximum operating limit. If so, the Freedom X
automatically shuts down when the maximum operating limit is
exceeded. See page 60 for precautions.
a.Assuming the inverter is connected to a battery source with an adequate charge at
the time of the power interruption.
Freedom X Series INV Owners Guide.book Page 2 Tuesday, June 27, 2017 4:10 PM