![background image](http://html1.mh-extra.com/html/xantech/xtr39/xtr39_installation-instructions-manual_3174489004.webp)
08905084D
-
4
-
Changing an IR Command to a RF Command
For projects where only certain commands will be sent via RF transmission, please proceed as
intended.
After an IR command has been placed under a function button, it can be configured to become an RF
command.
Step 1: In Universal Dragon under the “Command List” window, find the command to be configured.
Step 2: Right-click on the IR command and select “Properties”. A new window will appear.
Step 3: The “Properties” window is where the command type is configured. Default is an “IR” type
command. By selecting the radial button next to “RF”, the command type is changed to work with the
RF2IR.
Step 4: After selecting the “RF” radial button, the IR output on the RF2IR can be configured. By
default, the IR will emit out all emitter ports 1 through 4. The blaster is deactivated by default, but can
be selected if desired.
Step 5: Repeat Step 2 thru 4 for all IR commands desired.