Model PA435X
Page 13
© 2003 Xantech Corporation
A Multi-Zone System Diagram Using The PA435X and MRC88
Fig. 9, following, shows the PA435X in a typical multi-room system with a Xantech MRC88 eight-zone preamp.
Figure 9:
Interfacing the PA435X with an MRC88 Zones 7 & 8
In this case:
1. Using good quality RCA Stereo Patch Cords, connect the
Preamp Outputs
of
Zone 7
on the MRC88 to
the
Left and Right Audio Inputs
labeled
‘A’
on the rear of the PA435X.
2. Similar to step 1, connect the
Preamp Outputs
of
Zone
8 on the MRC88 to the
Left and Right Audio
Inputs
labeled
‘B’
on the rear of the PA435X.
3. Using two 3.5mm
Stereo
Mini Plug cables, connect the
Remote Amp CO1
jack on the rear of the
MRC88 to the
CI1
jack on the rear of the PA435X
4. Similar to step 3, connect the
Remote Amp CO2
jack on the rear of the MRC88 to the
CI2
jack on the
rear of the PA435X.
5. Set the Input Level Adjustment for both channels on the rear of the PA435X according to
Figure 4
. This
will match the output of the PA435X to the standard output of the other 6 Zones of the MRC88. You can
also adjust higher or lower according to customer preference.
Содержание PA435X
Страница 17: ...Model PA435X Page 17 2003 Xantech Corporation...
Страница 18: ...Page 18 Model PA435X 2003 Xantech Corporation...
Страница 19: ...Model PA435X Page 19 2003 Xantech Corporation...
