Model MRC44KP
Page 11
© 2001 Xantech Corporation
Keypad mounting for the MRC44 Keypad does not require a junction box.
The MRC44 keypad can be mounted on drywall, lath & plaster, button board
or other surfaces covering a hollow wall. Follow these simple procedures to
install the provided MRC44 mounting bracket and keypad:
1. Cutting the hole
a. Mark the desired mounting location for the center of the keypad.
b. Using a level, make proper horizontal and vertical marks on surface
to be cut, to properly orient template.
Figure 4 – MRC44 Keypad mounting template