17
Boot Menu Reference
Accessing the Boot Menu with a Serial Connection
Connect the Serial 1 Port of the CRM-WIC to your computer with an RS-232 Data Transfer Cable (also
known as a Null Modem Cable). Using Hyper Terminal (or similar software), connect to the CRM-WIC
with the default Serial Settings: Baud Rate: 9600, Data bits: 8, Parity: None, Stop bits: 1, and Flow
control: None. When connected, the CTS 1 and DSR 1 LEDs will light.
Press & hold the reset button for 5 seconds. The CRM-WIC Boot Menu will appear on the terminal
screen:
CRM-WIC Boot Menu
------------------------------
0 : Display Current Settings
1 : Restore Factory Defaults
2 : Configure IP Settings
3 : Set Password
4 : Set Host Name
5 : Download New Firmware
6 : Lamp Test
7 : Hardware Test
8 : Erase All Files
9 : OEM Functions
x : Exit menu and boot
Selection:
The boot menu will prompt you through setup and diagnostics.
Details about the options follow in this section.
Содержание CRM-WIC
