11
12
Network Install: Windows (cont.)
Clients with Windows Me &
Windows 98/95: Pull Installation
Copy the driver files from the XANTÉ ColourLaser
21 CD (\Drivers\Win9x\English\Pcldrv or Psdrv) to a
shared network directory of your choice.
On the client computer, click Start
® Settings ®
Printer
® Add Printer.
Use the Add Printer Wizard to install the drivers
from the network directory to the client computer.
Printing Directly from a Windows
Workstation
!
To use this feature, you must have an IP address
established and the printer driver installed.
To configure a Windows workstation to print directly to
your networked XANTÉ printer:
Insert the XANTÉ ColourLaser 21 CD in the
CD-ROM drive.
Click Start
® Run, then browse to the main
directory on the CD and double-click install.exe.
Click OK.
Click the Direct Network Printing button.
Follow the on-screen instructions to install ExtendNet
Connect, then exit the Menu Installer.
Use ExtendNet Connect to create a new port.
Configure each client’s printer driver(s) to the
network port (see the on-line XANTÉ Network User’s
Guide).
Activating the Duplex Unit and Hard
Drive in the Driver
If you have the XANTÉ ColourLaser 21D or the XANTÉ
ColourLaser 21HC, you must activate the duplex unit and
hard disk drive in the drivers before using them.
!
These procedures are also used when installing
optional memory SIMMs, auxiliary paper trays and
High Capacity Feeder. See “Accessories” in the on-
line XANTÉ User’s Guide.
To activate the Duplex Unit and Hard Disk
Drive in the PCL driver:
Click Start
® Settings ® Printer.
Right click the XANTÉ PCL printer icon, then click
Printing Preferences (Windows 2000), Properties
(Windows Me/98/95) or Document Defaults
(Windows NT 4.0).
In the Paper tab, click Device options, then click
Duplex option unit and Printer hard disk.
Click OK twice, then close the Printers dialog box.
To activate the Duplex Unit and Hard Disk
Drive in the PostScript driver:
Click Start
® Settings ® Printer.
Right click the XANTÉ PostScript printer icon, then
click Properties.
Windows 2000 and NT 4.0:
- Click the Device Settings tab.
- Scroll down to Installable Options.
- Click Duplex, then click Installed in the box
below; do the same thing for Hard Disk.
Windows Me, 98 and 95:
- Click the Device Options tab.
- Click Duplex, then click Installed in the box
below; do the same thing for Hard Disk.
Click OK, then close the Printers dialog box.