XAG V40, Руководство по эксплуатации для пилотов

Страница: 45 / 122

45
XAG AUSTRALIA
√ ENSURE to check and update Battery firmware and Device Software prior to any Flights.
√ ENSURE there are no liquid or foreign matter on the battery terminal, wipe and clean in atimely
fashion. Otherwise, it may cause poor contact, resulting in loss of power or charging failure.
X AVOID the Liquids (Electrolytes) in the battery as it is highly corrosive. If any liquid make contact
with your skin or eyes, rinse with clean water and seek medical attention immediately.
X DO NOT Fly when the Battery Level is less than 30%.
X DO NOT connect the Cathode and Anode of the battery with conductive object, otherwise it may
cause a short circuit.
X DO NOT Connect or Disconnect the battery when it is turned ON, otherwise the power ports may
be damaged.
X DO NOT use or store battery near heat sources such as a furnace, heater and within a vehicle
during hot days.
X DO NOT use Batteries with abnormal conditions such as swollen, leaking, or deformed batteries.
Contact XAG After-sales Support for further assistance.
X DO NOT use Overheated Battery exceeding 40° C, may lead to fire or an explosion.
X DO NOT disassemble, pierce or apply pressure the battery in any way, including but not limited
to behaviours such as Sitting / Standing on the Battery.
🧷
IMPORTANT
Using the Battery
Battery Level
When the battery is OFF, press the power button once to display the battery level.
When the battery is ON, observe the battery level indicators to see the battery level.
📖
INSTRUCTION
Battery Level Indicator Description
1 Green Flash 00 – 09 %
1 Solid Green 10 – 29 %
2 Solid Green 30 – 49 %
3 Solid Green 50 – 69 %
4 Solid Green 70 – 89 %
5 Solid Green 90 – 100 %