Xact XG2400, Руководство пользователя, Страница: 36 / 57

Answering System Operation
28
IMPORTANT: To ensure the proper operation of your Answering System:
1.
Plug the AC ADAPTOR into the POWER - IN CONNECTION Jack.
2. Press and hold down the RESET button for 2 seconds at the back of the BASE
UNIT before initial use.
Setting the Day/Time Stamp
Press and hold down the button until you hear the announcement “ Time is off,
please enter new time .” Then, enter the current day and time.
NOTES:
1. The HANDSET and BASE UNIT clocks are independent from each other. Set the
HANDSET clock by following the time setting steps on page 24.
2. In case of power failure, reset the time setting on the BASE UNIT clock.
Recording Your Outgoing Messages
Your Answering System provides one PRIMARY MAILBOX and four individual
MAILBOXES (1, 2, 3, 4) which can receive their own Incoming Messages (ICM). Before
using your Answering System, it is suggested that you record an Outgoing Message
(OGM). This is the announcement callers will hear when the system answers a call.
A prerecorded system announcement “ Please record your message after the beep ” is
available if you choose not to record your own OGM.
SET
1. Day Setting
Press and and hold down the button
for 2 seconds then press the or
button to select the desired day
setting. Press button again to accept
the setting, and then the LED Screen
will display hour setting.
2. Hour Setting
Press the or button to select the
hour, then press the button to accept
the setting. The LED Screen will
display the minute setting.
3. Minute Setting
Press the or button to select the
desired minute, then press the
button to accept the setting.
TIME
SKIP
RPT
TIME
TIME
SKIP
RPT
TIME
SKIP RPT