Xact XG2100 Скачать руководство пользователя страница 23

17

Warranty

Warranty Information

BellSouth Products

One-Year Limited Warranty

This limited warranty sets forth all 

BellSouth Products

 responsibilities regarding your product.

There are no other expressed or implied warranties from 

BellSouth Products.

Warranty Service Provided

If you purchased the telephone new from a retail vendor,

 BellSouth Products 

warrants the

telephone against defects in material and workmanship for a period of one (1) year from the original
date of purchase. This warranty is in lieu of all other expressed warranties. This warranty begins
when you purchase the telephone and continues for one (1) year unless you sell or rent the
telephone, in which case the warranty stops.

BellSouth Products

 disclaims any implied warranty, including the warranty of merchantability

and the warranty of fitness for a particular purpose, as of the date of 90 days from your original
purchase of the telephone. 

BellSouth Products

 assumes no responsibility for any special,

incidental, or consequential damages.

This warranty gives you specific legal rights and you may have other rights which vary from state
to state. Some states do not allow the exclusion or limitations of special, incidental or consequential
damages, or limitations on how long a warranty lasts, so the above exclusion and limitation may not
apply to you.

Warranty Service Not Provided

This warranty does not cover damage resulting from accident, misuse, abuse, improper installation
or operation, lack of reasonable care, unauthorized modification, the affixing of any attachment not
provided by 

BellSouth Products

 with the telephone and/or loss of parts. This warranty is voided

in the event any unauthorized person opens, alters or repairs the telephone. All 

BellSouth

equipment being returned for repair must be suitably packaged. Telephone companies use different
types of equipment and offer various types of services to customers. 

BellSouth Products

 does

not warrant that this telephone is compatible with the type of equipment of any particular telephone
company or the services provided by it.

IMPORTANT

The AC ADAPTOR must always be

plugged into an electrical outlet.

Содержание XG2100


























Отзывы: