10
Using the Headset Feature
Your telephone can utilize a headset (not included)
to be connected to your
HANDSET
for you to enjoy
hands-free communication. Pull out the HEADSET
JACK COVER then insert the small plug on the end of
the headset into the HEADSET JACK at the left side
of the
HANDSET
. Follow the procedures discussed
in “Receiving Calls” and “Placing Calls” to receive
and place a call.
NOTE:
When you plug the headset plug into the
HEADSET JACK it automatically mutes the
MICROPHONE and SPEAKER of the
HANDSET
. Unplug the headset to return the
HANDSET
to normal use.
Basic Operation
Headsets are available at most retail outlets that sell telephone equipment. The HEADSET JACK is
compatible with 2.5 mm headset plugs only.
Security System
Your cordless telephone uses a digital coding security system to prevent unauthorized use of your
telephone line by another nearby cordless telephone. The system has its own identifying signal
created by microcomputers in both the
BASE UNIT
and the
HANDSET
.
Security Code
This telephone has an internal security code with 65,536 possible combinations.
Resetting Security Code and Channel Information
Communication between the
HANDSET
and the
BASE UNIT
may not be possible in any of the
following situations:
1.
After a power failure.
2.
After relocating the
BASE UNIT
by disconnecting the
AC ADAPTOR
.
3.
After replacing the
HANDSET
BATTERY PACK.
To reset, place the
HANDSET
on the
BASE UNIT
for 2 to 5 seconds.
Multi-Channel Access
Your cordless telephone lets you select a channel from the 50 frequencies available to transmit
signals between the
BASE UNIT
and the
HANDSET
. When you notice interference from other
cordless telephones, change to another channel by pressing the
button on the
HANDSET
.
SCAN
MICROPHONE
HEADSET
SPEAKER
HEADSET JACK
HEADSET JACK
COVER
HEADSET PLUG (2.5mm)