manualshive.com logo in svg

Xact XG2100, Руководство пользователя, Страница: 11 / 25

Поделиться
Скачать
Xact XG2100 Скачать руководство пользователя страница 11

11.

TONE/PULSE Select Switch:

A.

If your home is equipped with a tone dialing system, set the TONE/PULSE Select Switch to
the TONE position.

B.

If you have a rotary dialing system, set the TONE/PULSE Select Switch to the PULSE
position.

C.

If you are unsure which system you have, set the TONE/PULSE Select Switch to the TONE
position. Press the   

   

  button on the 

HANDSET

 to get a dial tone, and press any button

on the TELEPHONE KEYPAD except the zero. If the dial tone continues, it means that you
do not have tone dialing service. Press the        button on the 

HANDSET 

to hang up. Set

the TONE/PULSE Select Switch to the PULSE mode and then try again.

Getting Started

5

6.

We recommend not placing this unit next to appliances. Doing so may cause interference.

7.

Install the 

HANDSET

 BATTERY PACK by plugging it into the BATTERY CONNECTOR inside the

BATTERY COMPARTMENT.

8.

Place the BATTERY PACK inside the BATTERY COMPARTMENT.

9.

Slide the 

HANDSET

 BATTERY COMPARTMENT COVER firmly into place in its closed position.

10. IMPORTANT:  

Before initial use, charge the HANDSET for 12 hours.  

Do not charge the

HANDSET with TELEPHONE KEYPAD face down.

Press the         button to confirm that you have a dial
tone. If you do not get a dial tone, review steps 3
through 11. If you still do not have a dial tone, refer to
the Problem Solving section on page 13.

Belt Clip Installation

With the back of the 

HANDSET 

facing up, insert one

side of the BELT CLIP HOOK into the matching slot at
the top side of the 

HANDSET

. Press down on the

opposite side of the BELT CLIP until the other hook
locks into the slot on the side of the

 HANDSET

.

You are now ready to use your new

BellSouth Cordless Telephone.

TALK

TALK

TALK

BATTERY PACK

BATTERY 

COMPARTMENT

COVER

9

7

8

BELT CLIP HOOK

Содержание XG2100


























Отзывы:

Нет отзывов