12
Once the desired temperature has been reached, turn the knob counterclockwise
until a click is heard. The light from the toggle switches will now also turn off.
The unit will now maintain the temperature by automatically turning on and off.
NOTE: When using the unit for the first time and after a longer period of
non-use, a slight odor may occur. This is normal and completely harmless. The
odor will disappear after a short time.
Fan/Turbo mode
(This applies exclusively to model 702011)
This function helps to distribute the heat faster in the room. To do this, use the
steps (1-4) as described under „Heating Function“, but in addition to the heating
switch, turn on the fan switch. A permanent light on the switch indicates that the
function is active.
HEATER
SWITCHES
FAN SWITCH
TURBO & TURBO-TIMER
ONLY MODELLE
THERMOSTAT
KNOB
SCHALTER
FÜR DIE
HEIZUNG
LÜFTERSCHALTER
NUR TURBO &
TURBO-TIMER MODELLE
THERMOSTAT
KNOPF
ZEIGER
SCHIEBE-
SCHALTER
SEGMENTE
2000W
1250W
750W
2000W
1250W
750W
POINTER
SLIDE
SWITCH
SEGMENTS
You can also use the fan function without the heating function, but it is not
designed to cool the room. To use it, turn the thermostat knob up until you hear
a click. Now flip the fan toggle switch. A permanent glow on the switch indicates
that the function is active.
Timer function
(This applies exclusively to model 702012)
The slide switch on the timer has the following functions:
„0“: The unit is switched off.
„Clock symbol“: The unit is switched on and the timer is active.
„1“: The device is switched on without timer.
Once the device has been switched to „1“ or „clock symbol“, you can apply the
steps (1-4) as under „Heating function“.
To use the timer function, follow these instructions: