X2E UPoB, Руководство пользователя

Страница: 12 / 26

User Manual UPoB
12
LEDs (E)
LED Colour Meaning
On
yellow input voltage invalid or no input voltage
green input voltage valid
(off) no input voltage and capacitors discharged
Info
yellow (blinking) discharge button (H) pressed
green (1x blinking) trigger signal sent
Status
yellow capacitors discharging,
charge higher than trigger level
yellow (blinking) capacitors discharging,
charge lower than trigger level
green capacitors completely charged
green (blinking) capacitors not charging and not discharging,
charge higher than 5 % and lower than 98 %
blue capacitors charging,
charge higher than trigger level
blue (blinking) capacitors charging,
charge lower than trigger level
(off) capacitors not charging and not discharging,
charge lower than 5 %
(all) red overcurrent
V
out
and GND (F)
Bridge mode:
V
out
= 12 V
Normal mode:
V
out
≈ V
in
- V
drop
V
drop
depends on the output load current (max. 500 mV at 5 A)
Overcurrent protection
The UPoB is equipped with overcurrent protection that reacts within 500 ms
if the output load current rises above 5 A.