X2E UPoB, Руководство пользователя

Страница: 10 / 26

User Manual UPoB
10
Configuration (B)
Switch Function when On
Trigger (1)
sends trigger signal if the capacitance drops below the config-
ured trigger level
(D)
Sleep (2) UPoB switches into sleep mode, where it does not send via
CAN and RS232, if:

the output load current drops below approx. 70 mA
UPoB wakes up if:

(Mode is On )
the output load current rises above approx. 80 mA

(Mode is Off )
the input voltage rises above 10.9 V
Mode (3) mirrors the state of the input voltage at the output
deactivates the voltage output if:

the input voltage drops below 10.0 V
activates the voltage output if:

the input voltage rises above 10.9 V
Output (4) voltage output (F) activated
(All values stated here apply to 0 A output load current. Please refer to the appendix for thresh-
olds of further currents.)
Impact of the output switch on other modes
In order for the sleep and mode switches to work as described, the output
switch needs to be
On . Otherwise, the UPoB cannot be woken up from
sleep mode if the mode switch is On , for example.