9
VK30A-4/99
8
VK30A -4/99
C
ONNECTING
U
P
H
OOKING
UP
THE
V
IDEO
T
RANSMITTER
1. Connect one set of Audio/Video cables to the VIDEO and AUDIO
jacks of your Video Transmitter. Take care to match the colors of
the plugs on the cable with the jacks on the Video Transmitter.
2. Connect the other end of the cable to the Audio/Video OUT jacks
on your primary TV (the one you want to send the picture FROM).
Take care to match the colors of the plugs on the cable with the
jacks on the TV. If the jacks on the TV are colored differently,
connect the yellow plug to the jack labelled VIDEO, the red plug
to the jack labelled AUDIO RIGHT and the white plug to the jack
labeled AUDIO LEFT.
Note:
If your TV does not include Audio/Video OUT jacks, you
will need to remake the connections as shown in diagram b) using
the TV antenna (coaxial) connections to link up the DSS Receiver/
Cable Box/VCR to your TV.
V
IDEO
S
ENDER
R
ECEIVER
2.4 GHz
Video
Antenna
TV Output
Connector
A/V Input
Jacks
Power Supply
Jack
2.4 GHz Channel
Switch
(on bottom)
TV Channel
Switch
(on bottom)
ON-OFF
Switch
(on side)
a) Connections for a TV
with A/V OUT jacks.
b) Connections for a TV
without A/V OUT
jacks.
A/V Cable
Coaxial
Cable
