7. Experiment with the camera angle using the joystick on the camera back to adjust the
direction of the camera while viewing the image on the monitor.(see below)
8. Mount the camera into the bracket:
A. Push the top of the camera into the top of the bracket.
B. Push the bottom of the camera into the bottom of the bracket.
C. Screw in the bottom of the camera to fix the camera into the bracket and push the
plastic screw cover into the bottom of the bracket, over the screw.
NOTE: Do not block the PIR sensor on the camera.
1) Positive (+) power input. Connect to the red wire of the included AC adapter or to the
positive wire of the doorbell
’
s power supply.
2) Negative (-) power input. Connect to the black wire of the included AC adapter or to
the negative wire of the doorbell
’
s power supply.
3) Egress (N.O.) negative input. Connect to an optional N.O. egress device. The egress
device will activate the relay for the same length as the lock delay.
4) N.O. (Normally opened) output. Wire to the lock device for fail-secure operation.
5) N.C. (Normally closed) output. Wire to the lock device for fail-safe operation.
6) Common output. Wire to the power supply of the lock device.
NOTE: For 9~16VAC doorbell installation, wire directly from the doorbell
’
s
transformer.