17
For convenience to transport and store, your
XMB-400 Mobility Scooter is designed to be
disassembled and assembled easily without any
special tools. You can easily disassemble the
scooter into four pieces: the front section, the
rear section, the seat unit and the batteries (See
Fig. 9).
DISSASSEMBLY
1. Make sure the power is shut off.
2. Pull the lock lever under the seat base to
unlock the seat.
3. Lift the battery case up (See Fig. 6, page
17).
4. Loosen the nuts on the plug of the front &
rear power connector, then remove it (see
Fig. 10).
5. Pull the nylon rope on the lock hook and
move forward to take it off (See Fig. 11).
6. Lift the front & rear section through the
middle and pull away from the lock hook on
the body (See Fig. 12).
7. Loosen the knob on the end of the tiller and
then fold the tiller (See Fig. 4, page 15).
DISASSEMBLY
Front Section
Rear Section
Figure 9
Seat Unit
Battery Unit
Figure 10
Figure 11
Figure 12
