15
For convenience of transportation and reduction of possible damage, the batteries and seat
unit are packaged separately. You will need to assemble these onto the main frame of your
scooter.
Inside the package you will find the following:
1. Your X-
Treme™ XMB-400 Mobility Scooter
2. Seat Unit
3. Batteries
4. Tool Kit
5. 24 Volt Battery Charger
6. User Manual
GETTING STARTED
Open the packing box of your new XMB-400 Mobility Scooter and take off all the protective
lining. Remove the scooter from the carton.
ADJUSTING THE TILLER
1. Loosen the lock-nut (See Fig. 4).
2. Lift the tiller up until at the proper angel for yourself.
3. Tighten the lock-nut to secure the tiller.
ASSEMBLING THE SEAT SUPPORT
1. Insert the seat support post into the seat tube located on the rear section (See Fig. 5).
2. Align the bolt hole.
3. Insert the bolt into the hole.
ASSEMBLY
Figure 4
Figure 5
