8
5. Tighten the knob on the handlebar to lock the handlebar to the handlebar
stem (Figure 5).
CHARGING THE BATTERY
Your Metro Express may not have a fully charged battery, therefore, you will
need to charge the battery prior to use.
Warning: Do not allow your batteries to go into deep discharge as this
may damage the battery
Figure 6
Figure 7
Figure 8
1. Make sure to turn the scooter off prior to charging. Once you’ve ensured the
scooter is off, plug the charger (Figure 6) into the charger port (Figure 7) on the
your Metro Express.
2. Plug the charger into the wall outlet. The charger will illuminate with a red
light to show charging has begun. If the charger does not light up check the
power to the outlet. If necessary try a different outlet.
3. Your initial charge time should be 12 hours. Once scooter is fully charged a
green light will illuminate. Unplug charger from the wall outlet and then remove
charger port from scooter.
WARNING! Always disconnect your charger from the scooter before
cleaning with liquid.
