10
the motor. When the unit feels like it is losing speed or not accelerating the unit
is ready to be recharged.
NOTE: If the on/off switch is left in the ON position for more than 10-15 minutes
without moving the Smart Power will shut itself off. To reset, turn the power to
OFF, wait a few seconds and then turn the power back to ON.
Check the brakes for proper function before each ride. When you squeeze the
lever the brake should provide positive braking action. When you apply the
brake with the speed control on the brake cut-off switch should stop the motor.
Make sure that the brakes are not rubbing.
Squeezing the hand brake on the left side of the handlebar activates the rear
brake. Squeezing the hand brake on right side will activate the front brake.
Practice braking on a smooth, dry surface to get used to the feel of the braking
system. Braking distance is affected by wet conditions and loose and uneven
riding surfaces.
FRAME, FORK & HANDLEBARS
Periodically check for cracks or broken connections. Although broken frames
are rare, it is possible for an aggressive rider to run into a curb or wall and
wreck and bend or break a frame. Get in the habit of inspecting your Metro
Express on a regular basis.
TIRES
Periodically inspect the tires for excess wear. Regularly check the tire pressure
and re-inflate as necessary. The Metro Express uses a tubeless tire.
SAFETY GEAR
Always wear proper protection gear such as an approved safety helmet. Elbow
pads and kneepads are recommended. Always wear athletic shoes (lace-up