X-Rite SP60 Series, Начало работы

Страница: 21 / 28

S P 6 0 S E R I E S
S P H E R E S P E C T R O P H O T O M E T E R
19
When auto standard is disabled (off), a standard must be
manually selected before a difference measurement.
•
Averaging – Sets the averaging option. Selects the number
of readings averaged into a single measurement (0-99).
•
Diff Disp – Selecting “Numbers” causes delta values to
display during difference measurements. This option is
automatically enabled when standards are entered or
downloaded from a software program. When set to
“Words”, color differences are displayed as words (e.g.,
brighter, duller, etc.). This setting is only available for
L*a*b* and L*C*h° color difference data. When disabled
(off), no delta values are displayed during measurements.
NOTE: No words display for an attribute that is less than 1/7
th
of
the DE value. A value less than this amount is considered
insignificant compared to the total difference. Delta values
greater than 10.00 display numerically.
Color Options
The Color Options configuration allows you to determine the
following settings:
•
Active Functions –Allows you to select the colorimetric
functions and indices that are available in the color data
parameters. An arrow (>) indicates the function is active.
•
Active Illum/Obs – Allows you to select the illuminant/
observer combinations that are available in the color data
parameters. An arrow (>) indicates the illum/obs
combination is active.
•
Opacity – Determines the data display method for opacity
measurements, and allows k1 and k2 value editing.
Data Display – Select Over White, Over Black, or
Color at 100%.
Set k1 and k2 – Allows you to adjust the opacity
constant of k1 and k2 for SPIN and SPEX.
•
Strength – Determines strength method and predicted
mode.
Method – Select Apparent, Chromatic, or Tristimulus
as the strength calculation.
Predicted is @ – Select 100% or Min
∆
E as the
predicted mode.